AcuRite ENC 150 Uživatelský manuál stáhnout pdf

P.N. 385039-138 1 Edition B

These are general application instructions for mounting

the longitudinal X axis.

The 32 , 35 & 36 encoders are typical to this application.

Other length encoders can be applied.

Before proceeding:

➤ Read the instructions completely before beginning.

➤ Mount longitudinal axis prior to cross feed installation.

➤ Axis travel must be < encoder measuring length.

➤ Customize installation steps as necessary.

➤ Clean the mounting surfaces.

➤ Adjust drill depths as required.

➤ Save the alignment brackets.

First Steps ...

Machine

✔ Move the table to its center of travel.

✔ Mark the axis so that it can be re-centered easily.

✔ Move the saddle completely forward on the knee.

Encoder

✔ Unpack both encoders in a safe, convenient location.

✔ Do not remove the reading head alignment

brackets until instructed.

Center reading head ...

 Slide the reading head and brackets along the

scale case until center marks on scale and

reading head are aligned.

 Reading head must stay centered on scale

case during encoder installation.

Stop (2)

5/16-18 x 3/4 SHCS (2)

ENC 150 Encoder

* M6 flat washer (2)

.017 thick

** Center support

* 8-32 x 3/4 SHCS (2)

* 1/4-20 x 1 BHCS (2)

** 1/4-20 x 3/4 BHCS

** M6 flat washer

.017 thick

ENC 150 Encoder Mounting Instructions

Vertical Knee Mill application using

Bracket Kit: 385039-000

ACU-RITE

Longitudinal Installation ...

* Supplied with encoder hardware

** Supplied with center support hardware

Alignment

bracket (2)

Align

center

marks

1 2 3 4 5 6 7

ACU-RITE 1

Shrnutí obsahu

Strany 1 - ACU-RITE

P.N. 385039-138 1 Edition BThese are general application instructions for mountingthe longitudinal X axis.The 32 , 35 & 36 encoders are typic

Strany 2

P.N. 385039-138 2 Edition BACU-RITE®ENC 150 Encoder Mounting InstructionsBracket Kit: 385039-000Saddle stops ... Locate stops a max of 2 to the sad

Strany 3

P.N. 385039-138 3 Edition BACU-RITE® Attach the encoder to the table.ENC 150 Encoder Mounting InstructionsBracket Kit: 385039-000 Align the top of t

Strany 4

P.N. 385039-138 4 Edition BThese instructions are for mounting the cross feed Yaxis encoder using the 13 encoder. A 12 encoder can beused with th

Strany 5

P.N. 385039-138 5 Edition BBracket assembly ... Assembly the brackets, fully extending theextension plate.Bracket attachment ...  Remove the bracket

Strany 6

P.N. 385039-138 6 Edition BACU-RITE®ENC 150 Encoder Mounting InstructionsBracket Kit: 385039-000 Attach the spar with leveling blocks to theknee. In

Strany 7

P.N. 385039-138 7 Edition BACU-RITE®Encoder button up ... Complete the cross feed and longitudinalencoder installations. Route the cables providing